Quartz Infrared Lamp

【HALOGEN HEATER】

• Dia. 6mm, 8mm, 10mm, 13mm, 15mm, or 19mm high purity quartz tube.
• Almost completely permeable for the radiation of I.R.
• High radiation intensity in a small area
• High Watt. Density per unit area
• Decrease thermal loss by high transmitting energy of I.R.
• Surface temp. of element up to 750 °C .
• Time of heat up: 1-2 seconds (very fast raising up and lowing down the temperature)
• Operating life to 5000 hrs.
• Max. Watt. density to 40w/cm.
• Max. I.R. emission between 0.75μm ~ 1.5μm
• Infrared wave length 500 ~1500nM
• Color temperature from 2450°K.
• Materials of filament: Tungsten wire
• Protective tube: Clear quartz glass
• Heat resistance of tube: 1100 °C
• Type of working : Horizontal or Vertical
• Ceramic (White) coating at back side as reflector.
• With and without gold reflector can be selected.
• Several types of base can be selected.
• Volts, Watts, length and base type can be designed on customer's request.

TYPE 1

A: QUARTZ GLASS B: HEATING WIRE C: HEAT-RESISTANCE INSULATED WIRE D: SQUARE CERAMIC BASE

Dimensions of square ceramic base

TYPE 2

A: QUARTZ GLASS B: HEATING WIRE C: HEAT-RESISTANCE INSULATED WIRE D: ROUND CERAMIC BASE

Dimensions of round ceramic base

TYPE 3

A: QUARTZ GLASS B: HEATING WIRE C: HEAT-RESISTANCE INSULATED WIRE D: ROUND CERAMIC BASE (R7S)

Dimensions of round ceramic base (R7S)

TYPE 4

A: QUARTZ GLASS B: HEATING WIRE C: HEAT-RESISTANCE INSULATED WIRE D: SQUARE CERAMIC BASE

TYPE 5

A: QUARTZ GLASS B: HEATING WIRE C: HEAT-RESISTANCE INSULATED WIRE D: ROUND CERAMIC BASE

** Other bases are available on your request. **

CLAMP FIXTURE FOR SQUARE CERAMIC BASE

TYPE 1

CLAMP FIXTUE FOR SQUARE CERAMIC BASE

TYPE 2

CLAMP FIXTURE FOR ROUND CERAMIC BASE (R7S)

TYPE 3